Highest processing flexibility and simplicity

Designed with you and your requirements in mind

1) Load a rack with cassettes, from 4 (e.g. transplant biopsies) up to 110 cassettes according to your requirements. Introduce histomodule in the Histos unit.
Only 4 taps on the touch screen are needed to start a process.

Authorized user log-in		Select the maximum thickness of specimen to be processed
Select maximum number of cassettes (55-110)		Select reagents to be used Ethanol/Isopropanol/ProWave/JFC
		Press "ENTER" and unit runs automatically tracing the ramping and time at temperature (T.A.T) protocol. An audible alarm signal will advise the operator that the step is completed.

2) Transfer the rack from histoprocessor to impregnation retort where wax is already kept at the optimum selected temperature.

Press "GO TO WAX" Press "START" Impregnation step will begin and run unattended. In the Histos 5 a programmable vacuum protocol down to 100 mm will eliminate all traces of remaining solvent and enhance impregnation. A powerful magnetic stirrer dynamically supports the wax process.		Dual (parallel) Processing Tap on the screen to start simultaneously the next run with the dehydration / clearing step. Both the impregnation step of the first run and the dehydration step of the second run will run simultaneously to double your productivity. At the end of the impregnation step, the rack is extracted from the wax retort, which can now accept the second run of specimens.